If you experience XML processing error (document ill-formed) when trying to register the serial key for Lunaris 2, then download and install the latest version of Native Access, this solves the problem and you will be able to register the serial key. You might have to reboot computer and log in to Native Access again, after updating.
Sometimes the transfer just won’t happen for some reason… but you can easily use and browse the patches directly from the USB drive without importing the sounds into GAIA. Just click the USB MEMORY on the Gaia and select and browse the sounds as you normally would do.
Just make sure the path on your USB drive is exactly: H:\Roland\SH01\SH01_PAT.SVD (where H: is the USB drive name)
By Luftrum|2022-01-01T19:24:31+01:00January 1st, 2022|Comments Off on There are no sounds after USB transfer to my Gaia
All presets in the Hey! Pads soundset require Serum v1.345 so please check if you are running the latest version of Serum and if you are not, then update to the latest version to fix the missing wav / sample / noise error.
By Luftrum|2022-02-01T19:18:43+01:00December 31st, 2021|Comments Off on Serum missing sample / unable to load wav due to a missing file.
The soundbank is transferred via USB drive. Put the Roland folder from the .zip file to the root of your USB drive, then proceed with the following:
1. Hold down the USB MEMORY PATCH button and press the WRITE button.
(The USB MEMORY PATCH button will light, and the WRITE button and CANCEL/SHIFT button will blink. If you decide to cancel the operation, press the CANCEL/SHIFT button.)
2. Press the WRITE button.
That’s it!
By Luftrum|2022-01-01T19:19:00+01:00December 31st, 2021|Comments Off on How do I transfer patches to the Gaia?
Please make sure your Omnisphere installation is up to date. You can check if there are any updates from the start-up screen of Omnisphere or you can click the Spectrasonics logo on the interface of Omnisphere. Make sure everything is up to date, in particular the Soundsources.
If everything is up-to-date try to delete the zmap.index file found below. It’s harmless to remove: